Table des Matières
Publicité
1 - PRINCIPLE.
DATA OUT OPTION (ON THE LIGHTING UNIT).
DATA
IN
2 - LINK USE.
CONNECTIONS
ATHOS
DATA Link
To install the DATA line, daisy chain all units.
You can not make a star configuration. In this case - use a specific DATA splitter.
robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thelle - phone: 33 (0)3.44.26.51.89 - fax: 33 (0)3.44.26.90.79 - www.robertjuliat.fr
DECOUPES MSR 1200W & 2500W
NETWORK USE
DIGITAL
By - pass
Booster
DATA
OUT
DATA only
Output
DATA +
Shutter control.
a
d
b
IN
OUT
DOSSIER TECHNIQUE
(DMX - AVAB).
- The DATA goes to the connector DATA IN on the
CAD 900 ( a ) .
- The signal is present on the DATA output of the
lighting unit.
- When the lighting unit is in use, there are two
possibilities for the output - DATA OUT :
1 : Booster on - The signal passes by an amp.
2 : Booster off - The signal passes on direct on
the output.
( Refer to User's manual CAD 900 - page 11 ).
- When the lighting unit is not in use ( power supply
off ), the DATA is still present on DATA output.
ATHOS
OPTION
Colour changer.
900 SNX
Section A - 11
C A D 900
C A D 900
0/10V - DMX 512 - AVAB
ERROR
SELECT
EXIT
+
DATA
EXT. DIGI.
LOCK
EXT.
LOCAL
RESET
a
c
d
b
DATA
0/10V
CONTROL
SHUTTER
DATA only
Output
DATA +
Shutter control.
a
d
b
IN
OUT
OPTION
Colour changer.
etc.
Publicité
Table des Matières
