Ottobock 17B20 Serie Instructions D'utilisation page 14

7 Maintenance
CAUTION
Wear and tear of the locking mechanism
Injuries due to changes in or loss of functionality
► In case of wear and tear of the locking mechanism, replace the lock
wedge or the lock lever and/or the lower joint section.
INFORMATION
The product may be exposed to increased loads by the patient.
► Shorten the maintenance intervals according to the expected loads.
The manufacturer requires at least a semi-annual inspection of the product
to verify functionality and check for wear.
Only use 633F7 special lubricant.
Spare parts are listed in the section "Components/design".
8 Disposal
Dispose of the product in accordance with national regulations.
9 Legal information
All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
9.1 Liability
The manufacturer will only assume liability if the product is used in accord­
ance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthor­
ised modification of the product.
9.2 CE conformity
The product meets the requirements of Regulation (EU) 2017/745 on medic­
al devices. The CE declaration of conformity can be downloaded from the
manufacturer's website.
1 Avant-propos
INFORMATION
Date de la dernière mise à jour : 2021-06-07
14
Français