GB
During pulling operation
Cause
Overload
Electronics overheated
Battery discharged
After releasing the trigger button
Cause
Front end position not reached
Caution!
If faults occur that are indicated by the red lamp and cannot be rectified as described above,
have the riveting tool repaired by a skilled technician or send it in to the manufacturer.
6.
Warranty
The applicable terms and conditions of warranty shall apply and can be viewed under following
link: www.gesipa.com/agb
28
Corrective measures
Use tool within working range as specified in
table (see 2.6.)
Allow riveting tool to cool down in air
Charge or replace
Corrective measures
Tighten jaw mechanism (see 2.8 and 5.2)