Warranty - Gesipa FireBird Mode D'emploi

GB
During pulling operation
Cause
Overload
Electronics overheated
Battery discharged
After releasing the trigger button
Cause
Front end position not reached
Caution!
If faults occur that are indicated by the red lamp and cannot be rectified as described
above, have the blind rivet nut setting tool repaired by a skilled technician or send it in to the
manufacturer.
5.

Warranty

The applicable terms and conditions of warranty shall apply and can be viewed under following
link: www.gesipa.com/agb
22
Corrective measures
Use tool within working range as specified in
table (see 2.6.)
Allow blind rivet nut setting tool to cool down in
air
Charge or replace
Corrective measures
Screw together mechanical parts