Fagor 6H-760 BX Manuel D'installation Et D'utilisateur page 9

2 / USING YOUR OVEN EN
Cooking with delayed start and chosen
-
cooking end time
Proceed as with programmed cooking.
- After setting the cooking time, press on the
" " button until the cooking end time
indicator " " flashes.
The time display flashes to indicate that you
fig.1
can now adjust the setting (fig. 1).
- Press the + or — button to set the desired
cooking end time (fig. 2).
Example: end of cooking at 13:00 (fig. 3).
fig.2
The cooking end time is automatically
recorded after a few seconds.
The cooking end time display stops flashing.
After these 3 steps, the oven heating is
delayed so that cooking ends at 13:00.
fig.3
At the end of cooking (end of programmed
time),
- The oven stops,
- 0:00 is displayed,
- a series of beeps sounds for a few minutes.
The beeps can be stopped by pressing the
" " button.
The display shows the time once again when
the function selector switch is returned to 0
0
(fig.3).
In the case of programmed cooking cycles,
fig.3
the cavity lights up until cooking begins, and
remains lit until cooking is finished.
9