Table des Matières
Publicité
FRONT SUSPENSION/REAR SUSPENSION
1
b
a
Compression damping force adjustment
(RS90GT)
The compression damping force can be adjusted
by turning the adjuster 1.
12 clicks out 7 clicks out
Adjuster
position
Minimum
Turns out b* ←
Compres-
Soft ←
sion damp-
ing force
* With the adjuster fully turned lightly in direction a
CAUTION:
• Do not continue to turn the adjuster in direc-
tion a after it stops. The shock absorber can
be damaged and compression damping force
adjustments cannot be made.
• Do not turn the adjuster in direction b more
than 12 clicks. Even if the adjuster is continu-
ally turned after 12 clicks, there will be no
change in the compression damping force.
• Be sure to stop the adjuster at a position
where there is a click.
REAR SUSPENSION
Stopper band
1. Adjust:
• Stopper band length
CAUTION:
Make sure the left and right rear suspension
stopper bands are adjusted evenly. (RS90N/
RS90NR/RS90RS/RS90MS)
NOTE:
This adjustment affects the handling characteristics
of the machine.
25
INSP
ADJ
2 clicks out
Standard
Maximum
→ Turns in a
→ Hard
Publicité
Table des Matières
