Yamaha RX-V757 Mode D'emploi page 28

AUTO SETUP
The results displayed in the RESULT:EXIT screen
are as follows:
SP
The number of connected speakers
displayed in the order:
Front/Back/Subwoofer
DIST
The distance of the speakers from this
unit displayed in the order:
Closest speaker distance/Farthest
speaker distance
LVL
The speaker output level displayed in
the order:
Lowest output level/Highest output
level
• If you selected AUTO in step 5, "WAITING"
appears when the auto setup procedure is started,
then loud test tones are output from each speaker in
turn.
• If you selected DEFAULT, RELOAD or UNDO in
step 5, no test tones are output.
• If an ERROR screen appears, see "If an error
screen appears" on page 26.
• If a WARNING screen appears, see "If a warning
screen appears" on page 27.
y
You can display the detailed result information by using d and
ENTER to select "RESULT". In the detailed result information
screen, you can switch information by pressing u / d / j / i.
7
Press j / i to select SET or CANCEL, then
press ENTER to return to the SET MENU
screen.
RESULT:EXIT
WARNING (3)
RESULT
SP
DIST: 10.0/ 12.0ft
LVL : -9.0/ +6.5dB
. >SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
SET
To apply the auto setup (YPAO)
settings.
CANCEL
To cancel the auto setup (YPAO)
without making any changes.
y
If you are not satisfied with the result or want to manually adjust
each setup parameter, use the manual setup parameters (see page
52).
Notes
• If E-10 appears during testing, restart the procedure from step 3.
• To cancel the auto setup procedure before completion, press u.
26
: 5/4/0.1
■ If an error screen appears
Use u / d / j / i to select RETRY or EXIT, then press
ENTER.
ERROR
. E-9:USER CANCEL
.
. Don't operate
. any function.
. >RETRY
[ ]/[ ]:Up/Down
[ENTER]:Enter
RETRY
To retry the auto setup procedure.
EXIT
To exit auto setup.
EXIT