Mafell ERIKA 85 E Notice D'emploi Et Liste Des Pièces Détachées page 25

1.2 Machine identification
The following data required for machine identification are stated on the rating plate attached to the front of the
machine frame (Fig. 1 - page 3):
Mafell:
Erika 85 E:
Art.-Nr.:
230 V ~:
50 Hz:
10.9 A (10,0 A - CH):
2400 W (2300 W - CH):
n 1900 – 3800 min :
-1
0
Nr.:
2002:
In additon, the following information is given on the data label attached to the rear of the machine frame (Fig. 4 -
page 3):
∅
250 - 240 mm /
Spaltkeildicke 2,2 mm:
max. Schnitthöhe 85 mm:
Manufacturer's name
Type designation of the machine
Type-specific identification-number 971601, 971620, 971621
Necessary mains voltage (single phase alternating current)
Necessary mains frequency
Nominal power consumption at 230 V
Power input (nominal load)
Idle speed range of the saw blade
Machine number
Year of construction
Pretection class II
CE-mark to declare conformity with the essential health and
safety requirements according to Annex I of the Machinery Direc-
tive
Only for EU countries
Do not dispose of electric tools together with household waste
material!
In observance of European Directive 2002/96/EC on waste elec-
trical and electronic equipment and its implementation in accord-
ance with national law, electric tools that have reached the end of
their life must be collected separately and returned to an environ-
mentally compatible recycling facility.
∅
Maximum and minimum permissible saw blade diameter
30 mm:
(9 27/32 - 9 7/16 in.) and bore diameter
Thickness of mounted riving knife / splitter (3/32 in.)
max. cutting height with mounted saw blade (3 3/8 in.)
-25-