Selecting A Video Signal To Be Output During An Audio Reproduction - Yamaha RX-V1065 Mode D'emploi

Connect / Disconnect
Input source: BLUETOOTH (DOCK)
Connects to or disconnects from a Bluetooth component.
Pairing
Input source: BLUETOOTH (DOCK)
Performs pairing of this unit and a Bluetooth component
(page 34).
Video Out
Input source: AUDIO 1/2, MULTI CH
Choices: AV1 to AV6, V-AUX, Off*
Specifies a video signal to be output during an audio
reproduction. For details, see "Selecting a video signal to
be output during an audio reproduction" on this page.
Setting the option menu for each input source (Option menu)
Selecting a video signal to be output
during an audio reproduction
This function enables this unit to output video signals
when "AUDIO 1", "AUDIO 2" or "MULTI CH" is
selected as the input source. Follow the procedure below
to select the video to be output during an audio
reproduction.
1
Rotate the RINPUT selector (or press
dInput selection key) to select "AUDIO
1", "AUDIO 2" or "MULTI CH" as the input
source.
2
Press rOPTION on the remote control.
The Option menu for the selected input source is
displayed.
3
Press jCursor k / n to select "Video Out"
and then press jENTER.
Video;;;;;;Off
4
Press jCursor l / h to select a video input
jack to be used during an audio
reproduction.
– AV1-2 (COMPONENT VIDEO)
– AV3-6 (VIDEO)
– V-AUX (VIDEO)
– Off (no video output)
5
To exit the Option menu, press rOPTION.
39
En