Outputting A Video Signal Input From Another Input Source During Reproducing A Multi-Channel Audio Signal - Yamaha RX-V765 Mode D'emploi

■ FM Mode
Input source: TUNER
Choices: Stereo*/Mono
Sets FM broadcasting receiving mode.
Stereo Receives in stereo mode.
Mono
Receives in monaural mode. You can get a
better reception in monaural mode.
■ Auto Preset
Input source: TUNER
Automatically detects radio stations in the FM frequency
band and registers them as preset stations (see page 31).
■ Clear Preset
Input source: TUNER
Clears the preset stations (see page 32).
■ Shuffle
Input source: iPod (DOCK)
Off*/Songs/Albums
Choices:
Changes the shuffle playback style (see page 34).
■
Repeat
Input source: iPod (DOCK)
Off*/One/All
Choices:
Changes the repeat playback style (see page 34).
■
Connect Disconnect
/
Input source: Bluetooth (DOCK)
Switches communication with a Bluetooth component on
and off (see page 35).
■ Pairing
Input source: Bluetooth (DOCK)
Performs pairing of this unit and a Bluetooth component
(see page 35).
■ Video Out
Input source: MULTI CH
Choices: AV1 to 6/V-AUX/Off*
When the multi-channel input is selected, outputs a signal
input from another terminal to the video monitor. See
"Outputting a video signal input from another input source
during reproducing a multi-channel audio signal" on this
page.
Setting the option menu for each input source (OPTION menu)
Outputting a video signal input from
another input source during
reproducing a multi-channel audio
signal
When "MULTI CH" is selected as the input source, a
video signal input from another terminal can be output to
the video monitor. For example, even if an audio and
video component such as a DVD player that does not
support a multi-channel digital audio output, the video
signal can be output to the video monitor while
reproducing a multi-channel analog audio signal.
1
Rotate the RINPUT selector (or press
eMULTI) to change the input source to
"MULTI CH."
2
Press rOPTION on the remote control.
The OPTION menu appears.
3
Press kCursor k / n to display "Video Out,"
and press kENTER.
The following screen appears.
MULTI CH OPTION
Video Out;;;;Off
[ [
[ ]/[ ]:Video
[Return]:Return
4
Press kCursor l / h to select a video input
jack to which a component to be used as a
video input source is connected.
– AV1-2 (COMPONENT VIDEO jacks)
– AV3-6 (VIDEO jack)
– V-AUX (VIDEO jack)
– Off (no video input)
5
To end the setting, press rOPTION.
39
En