Switching On And Off The Steam Bath Light; Setting The Fragrance Intensity /Switching On And Off The Fragrance Dispensing; Setting The Temperature Setpoint - Nordmann Engineering AT4D Instructions D'installation Et D'exploitation

5.3

Switching on and off the steam bath light

5.4 Setting the fragrance intensity /Switching on and off the fragrance
dispensing
5.5

Setting the temperature setpoint

To switch on and off the steam bath light tap on the
the key (Light 2) . If the steam bath light is switched on the correspond-
ing key is represented inversely.
42°C
Standby
45min
Note: the fragrance intensity settings are automatically adjusted between
the control of the Nordmann AT4 D and the steam bath control.
42°C
Standby
45min
Aroma 1 Aroma 2
Note: the temperature setpoint value is automatically adjusted between the
control of the Nordmann AT4 D and the steam bath control.
42°C
Standby
45min
Example: Light 1 switched on and Light 2
switched off.
In the operating display (standby or steam bath
operation) tap on the
Set the fragrance intensity level for fragrance
pump 1 and 2 using the
tap on the to save the settings.
Note: to deactivate a fragrance pump set the
corresponding intensity level to "0".
In the standby operating display tap on the
and keys to set temperature setpoint
(Setting range: 25...55 °C).
key (Light 1) and/or
key.
and keys. Then,
43