Switching On And Off The Steam Production - Nordmann Engineering AT4D Instructions D'installation Et D'exploitation

5.2

Switching on and off the steam production

42
In the standby operating display tap on the
42°C
Standby
45min
The steam production is started. The actual
steam bath temperature and the status indica-
42°C
22°C
tion "WarmUp" is shown in the status indication
WarmUp
field. The set steam bath time starts to count
45min
down.
As soon as the set setpoint temperature in
the steam bath cabin is reached the status
42°C
43°C
indication changes to "Bathing". Depending
Bathing
on the configuration of the Nordmann AT4 D
40min
the light is automatically switched on or must
be switched on manually using the
(Light 1) or
As soon as the bathing time has elapsed the
steam production is automatically stopped.
42°C
Depending on the configuration of the Nord-
Drying
mann AT4 D the drying process of the cabin
45min
starts (status indication "Drying") or the control
returns to standby operation (status indication
"Standby").
Note: Depending on the configuration of the
Nordmann AT4 D the light must be switched
off manually using the
42°C
key (Light 2) or it is switched off automatically
Standby
after a defined follow-up time.
45min
key.
key (Light 2) (see chapter 5.3).
key (Light 1) or
key