Nordmann Engineering AT4D Instructions D'installation Et D'exploitation page 31

Behaviour in case of danger
If it is suspected that safe operation is no longer possible, then the
Nordmann AT4 D should immediately be set out of operation, discon-
nected from the mains and secured against accidental power-up (see
operating instructions for Nordmann AT4 D). This can be the case under
the following circumstances:
– if the external steam bath control Nordmann TP is damaged
– if the external steam bath control Nordmann TP is no longer operating
correctly
– if the connecting cable is damaged
All persons working with the external steam bath control Nordmann TP
must report any alterations to the unit that may affect safety to the owner
without delay.
Prohibited modifications to the unit
No modifications must be undertaken on the external steam bath control
Nordmann TP without the express written consent of the manufacturer.
For the replacement of defective components use exclusively original ac-
cessories and spare parts available from your Nordmann supplier.
31