Unpacking - Tecno-gaz Europa B EVO Mode D'emploi

Power supply cord
Take the power supply cord provided and insert the female plug (FIG.21–pos.B) in the
socket of the back panel of the autoclave (FIG.1–pos.6). Then insert the male plug
(FIG.21–pos.A) in the electric plug of the system.
Picture
Envelope standard
06
The autoclave is shipped in a suitable package to be transported and moved easily and to
protect its contents.
The package must not be jostled, it must be moved with care avoiding letting it turn over or
fall from a height superior to 16 cm.
In case autonomous handling means are not available handle the packaged autoclave
always in two persons.
Autoclave is placed on wooden pallet and packed with corrugated cardboard internal and
external application.
For remove the autoclave to its pack please remove first the corrugated cardboard.
For lift the autoclave please use the belts.
The autoclave shall have to be handled by at least two people and by using
belts only.
Do not lift the autoclave from the inferior part of the door or command
panel, this incorrect operation can create problems of a mechanical nature.
ATTENTION: Always conserve original packaging.
Inside the package you will find:
• USER'S MANUAL : to be read with attention and kept in a place available to all
operators assigned to sterilization.
• CERTIFICATION : which must be conserved.
• GUARANTEE LABEL: which must be completed and send.
FIG.21

UNPACKING

ENGLISH
1
15