DENTAURUM Polyclav Mode D'emploi page 13

Unpacking
The Polyclav is protected against damage during shipment. In the unlikely event that the Polyclav
®
your specialist supplier or forwarding agent should be notified immediately.
Complete unit
Polyclav polymerization pressure vessel, without compressor connecting hose.
®
REF 070-000-00
Technical data
Height
Internal diameter (max.)
Weight
Material
Volume
Working pressure
Admissible working excess pressure
Test pressure
Maximum pressure in the compressed air circulation
Maximum working temperature
Pressure vessel
Polyclav
Spare parts
®
Description
Inlet valve, complete
Pressure gauge, complete
Safety valve, complete
Locking lever complete (pressure release valve and lid lock)
Handles for lid and pressure pot
Handhold
Rubber pressure seal
Compressor connecting hose
Please note:
Should repairs ever become necessary, please return the entire Polyclav
180 mm, with valve 250 mm
200 mm
ca. 2.5 kg
Aluminium with Teflon inner coating
®
4 litres
2.0 – 2.2 bar (29 – 32 psi)
2.5 bar
4 bar
8.0 bar
50 °C/122 °F
category I acc. to guideline 97/23 EC
REF
070-100-00
070-200-00
070-300-00
070-400-00
070-500-00
070-500-50
070-600-00
070-700-00
vessel (not just the lid or the body) to the factory.
®
has been damaged during transit,
®
No. of items
1 piece
1 piece
1 piece
1 piece
1 pair
1 piece
1 piece
1 piece
EN
 en
polyclav 13
®