Using Your Headphones; Displaying Input Signal Information; Changing Information On The Front Panel Display - Yamaha RX-V765 Mode D'emploi

Playback

Using your headphones

Plug your headphones in the BPHONES jack on
the front panel.
When you select a sound field program while using the
headphones, the mode is automatically set to SILENT
CINEMA mode.
Notes
• When you connect headphones, no signals are output from the
SPEAKERS terminals.
• When multi-channel signals are processed, sounds in all channels are
divided to left and right channels. When the input source is set to
"MULTI CH," only front L/R sound is output from the headphones.

Displaying input signal information

When HDMI1-4 or AV1-4 is selected as the input source,
you can display audio/video signal information.
y
• Input signal information is displayed on both a video monitor and the
front panel display.
1
Select the desired input source, and press
rOPTION.
The OPTION menu for the selected input source is
displayed (see page 37).
2
Press kCursor k / n to select "Signal Info,"
and press kENTER.
Information on input signals is displayed. See
page 38 on information displayed on the screen.
y
• You can change items of information displayed on the front panel
display using kCursor k / n.
• If an HDMI related error occurs, error information is displayed at
the bottom of the screen.
3
To end the information display, press
rOPTION.
26
En
Changing information on the front
panel display
You can display information on the front panel display
such as the names of the currently selected sound field
program and surround decoders on the front panel display.
To change the display, press FINFO (or gINFO)
repeatedly. The following information can be displayed on
the front panel display.
• Currently selected input source name (Input)
• Currently selected sound field program name (DSP
Program)
• Currently selected surround decoder (Audio Decoder)
• Currently set FM/AM tuner frequency (Frequency)
• iPod playback information (Song, Album, Artist, List)
For example, if you select HDMI1 and display "DSP
Program," the following screen appears on the front panel
display.
Input source
Straight
Sound field program (DSP program)
The information on each input source that can be
displayed is shown in the table below.
Input source
HDMI1-4
AV1-6
AUDIO1-2
V-AUX
MULTI CH
FM/AM
iPod
(Simple remote mode)
iPod
(Menu browse mode)
Bluetooth
Items
Input
DSP Program
Audio Decoder
Input
Frequency
DSP Program
Audio Decoder
Input
DSP Program
Audio Decoder
(Play information display)
Artist
Album
Song
DSP Program
Audio Decoder
(Play menu display)
List
Input
DSP Program
Audio Decoder