Connecting A Video Monitor - Yamaha RX-V765 Mode D'emploi

Connecting a video monitor

Connect a video monitor such as a TV or projector to an output jack of this unit. You can select one of the following three
types according to the input signal format supported by the video monitor: HDMI OUT, COMPONENT VIDEO and
VIDEO (composite video).
Note
• Make sure that this unit and video monitor are unplugged from the AC wall outlets.
TV or projector
a
HDMI
FM
UNBAL.
DEO
■
To connect an HDMI video monitor
Jacks on components
a HDMI input
y
• This unit supports the HDMI control function. By connecting a TV that
supports the HDMI control, operations of this unit can be controlled with
the remote control of the TV. For details, see page 36.
■
To connect component video monitor
Note
• Only video signals input from this unit via the COMPONENT VIDEO
jack are output from the COMPONENT VIDEO jack.
Jacks on components
b Component video output
■
To connect composite video monitor
Note
• Only video signals input from this unit via the VIDEO jacks are output
from the VIDEO jacks.
Jacks on components
c Video input (composite)
c
b
V
Y P P
B R
OUT HDMI 1 HDMI 2 HDMI
(BD/DVD)
ANTENNA MONITOR OUT
COMPONENT
VIDEO
GND AM REMOTE
P
R IN
OUT
VIDEO
P
B
Y
12V
0.1A MAX.
TRIGGER OUT
Jacks on this unit
HDMI OUT
Jacks on this unit
MONITOR OUT
(COMPONENT VIDEO)
Jacks on this unit
MONITOR OUT (VIDEO)
Outputting sound of a TV from this unit
To output sound of a TV from this unit, connect an audio
output terminal of the TV to any of the AV 1-6 jacks.
If the TV supports an optical digital output, we
recommend that you use the AV 1. Connecting to the AV 1
allows you to switch an input source to the AV input 1
with a just a single key operation using the SCENE
function (see page 24).
TV or projector
Digital output
VIDEO
P
R
P
B
VIDEO
Y
O
OPTICAL COAXIAL COAXIAL OPTICAL
( TV ) (CD)
AV 2 AV 3 AV 4
Note
• If the video monitor connected to this unit supports the HDMI control
function, we recommend that you connect its audio output jack to the
OPTICAL jack of the AV1 jacks of this unit. By doing so, this unit
automatically turns on and "TV" of SCENE is automatically selected
when you turn on the video monitor. You can obtain the same result even
if you connect the audio output jacks to the AV2-6, AUDIO1-2 or V-
AUX jacks by assigning those jacks to TV in advance (see page 24).
Connections
(optical)
VIDEO
GND AM
FM
P
R
P
UNBAL. B
Y
AV
AV 5 AV 6 OUT AUDIO1 AUDIO2
15
En