Controlling Other Components With The Remote Control; Setting Remote Control Codes - Yamaha RX-V765 Mode D'emploi

Controlling other components with the remote control

You can control external components for a selected input source with the remote control. The keys available for
controlling external components are as follows:
dSOURCE POWER
Turns on and off an external component.
kCursor, ENTER, RETURN
Operates the menus of external components.
tDISPLAY
Switches between the screens of external components.
lExternal component operation keys
Function as a recording or playback key of an external
component, or a menu display key.
mNumeric keys
Function as numeric keys of an external component.
nTV control keys
INPUT Switches video inputs of TV
MUTE Mute audio of TV
TV VOL +/– Controls the volume of TV
TV CH +/– Switches channels of TV
POWER Turns on and off TV
y
• You need to set the remote control code first to control external
components.
• The remote control keys for controlling external components are
available only when the external components have corresponding control
keys.
The following remote control codes are assigned to input
sources as factory default settings. For a complete list of
available remote control codes, refer to "List of remote
control codes" at the end of this manual.
■
Default remote control code settings
Input source Category
[HDMI1] Blu-ray Disc
[HDMI2] —
[HDMI3] —
[HDMI4] —
[AV1] —
[AV2] —
[AV3] CD
[AV4] —
[AV5] —
[AV6] —
[AUDIO1] —
[AUDIO2] —
[V-AUX] —
[A]/[B] —
[DOCK] DOCK
Default
Manufacturer
code
Yamaha 2018
— —
— —
— —
— —
— —
Yamaha 5013
— —
— —
— —
— —
— —
— —
— —
Yamaha 5011
Input source Category
[TUNER] Tuner
[MULTI CH] —
"—" indicates no assignment
y
• An external component that is controlled by the remote control can be
automatically selected according to the iSCENE key selection
(see page 25).

Setting remote control codes

You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to "List of remote
control codes" at the end of this manual.
y
• Each of the steps described in this section should be performed within
one minute. Setting operation is automatically canceled when one minute
has passed since the last step. If the operation is cancelled, start again
from the beginning.
1
Press oCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
cTRANSMIT on the remote control blinks twice.
2
Press eInput selection keys
corresponding to the input source whose
remote control code you want to register.
3
Enter a remote control code using
mNumeric keys.
Once the remote control code is registered,
cTRANSMIT on the remote control blinks twice.
If it fails, cTRANSMIT blinks six times. Repeat
from step 1.
Default
Manufacturer
code
Yamaha 5007
— —
53
En