Connecting A Tv Monitor Or Projector - Yamaha RX-V565 Mode D'emploi

Connections

Connecting a TV monitor or projector

Connect a video monitor such as a TV or projector to an output terminal of this unit. You can select one of the following
three types according to the input signal format supported by the video monitor.
Note
• When you connect this unit to the video monitor, make sure that this unit is on standby.
TV, or projector
a
S VIDEO
■
To connect an HDMI video monitor
Jacks on components
a HDMI input
■
To connect component video monitor
Note
• Only video signals input from this unit via the component input terminal
are output from the component output terminal.
Jacks on components
b Component video output
■
To connect composite video monitor
Note
• Only video signals input from this unit via the composite video input
terminal are output from the composite video output terminal.
Jacks on components
c Video input (composite)
14
En
c
b
V
Y P P
HDMI
B R
(BD/DVD)
HDMI OUT HDMI 1 HDMI 2
ANTENNA
COMPONENT
VIDEO
UNBAL.
P
R
FM GND AM
P
B
VIDEO
Y
MONITOR OUT
Jacks on this unit
HDMI OUT
Jacks on this unit
MONITOR OUT
(COMPONENT VIDEO)
Jacks on this unit
MONITOR OUT (VIDEO)
Outputting sound of a TV from this unit
To output sound of a TV from this unit, make connection
between the AV input 1-6 and an audio output terminal.
If the TV supports an optical digital output, we
recommend that you use the AV input 1. Connecting to the
AV input 1 allows you to switch an input source to the AV
input 1 with just a single key operation using the SCENE
function (see page 21).
HD
P
R
P
B
Y
TV, or projector
Digital output
(optical)
UNBAL.
S VIDEO
FM
VIDEO
O
OPTICAL COAXIAL COAXIAL OPTICAL
( TV ) (CD)
AV 2 AV 3 AV 4 AV 5 AV 6
GND AM
AV
OUT