Sony Handycam HDR-TD10 Mode D'emploi page 43

 When the installation is
completed, remove the CD-ROM
from the computer.
Click (PMB icon) that appears on the

desktop of the computer to start up the
software.

Notes
To create discs or use other functions on

Windows XP, Image Mastering API v2.0 for
Windows XP should be installed. If Image
Mastering API v2.0 for Windows XP has not
been installed yet, select it from required
programs on the installation screen and install
it following the procedures displayed. (The
computer must be connected to the internet
for the installation.) You may install Image
Mastering API v2.0 for Windows XP in
response to the message displayed when you try
to start those functions.
Operation is not guaranteed if you read or write

video data from or to the camcorder using
software other than the supplied "PMB. " For the
information on the compatibility of the software
you are using, consult the manufacturer of the
software.
To disconnect your camcorder from the
computer

Click the icon at the bottom right of the
desktop of the computer  [Safely remove
USB Mass Storage Device].
 Touch [Cancel]  [Yes] on the camcorder
screen.
 Disconnect the USB cable.
If you are using Windows 7, the

not appear on the desktop of the computer. In
this case, you can disconnect the camcorder
from your computer without following the
procedures described above.

Notes
Do not format the internal memory of the

camcorder using a computer. If you do this, the
camcorder will not operate correctly.
Do not insert AVCHD recording discs that have

been created using the "PMB" software to DVD
players or recorders, as these devices do not
support the AVCHD standard. If you do, you
may not be able to remove the disc from these
devices.
When you access the camcorder from the

computer, use the supplied software "PMB. " Do
not modify the files or folders on the camcorder
from the computer. The image files may be
damaged or may not be played back.
Operation is not guaranteed, if you operate the

data on the camcorder from the computer.
The camcorder automatically divides an image

file that exceeds 2 GB or larger and saves the
parts as separate files. All image files may be
shown as separate files on a computer, however,
the files will be handled properly by the import
function of the camcorder or the "PMB"
software.
Use the supplied "PMB" software when you

import long movies or edited images from
the camcorder to a computer. If you use other
software, the images may not be imported
correctly.
When you delete image files, follow the steps

on page 39.
You can create a Blu-ray disc from 2D movies

by using a computer with a Blu-ray disc burner.
Install the BD Add-on Software for "PMB. "
icon may
US