Roland SonicCell SRX Serie Mode D'emploi page 255

2. Data Transmission
Messages (except System Common and System Realtime Messages)
that are received are then sent out when Soft Thru parameter
(System MIDI) is switched to ON.
■Channel Voice Messages
●Note off
Status 2nd byte
8nH kkH
9nH kkH
n = MIDI channel number:
kk = note number:
vv = note off velocity:
* This message is transmitted from SMF Player.
●Note on
Status 2nd byte
9nH kkH
n = MIDI channel number:
kk = note number:
vv = note on velocity:
* This message is transmitted from SMF Player.
●Polyphonic Key Pressure
Status 2nd byte
AnH kkH
n = MIDI channel number:
kk = note number:
vv = Polyphonic Key Pressure: 00H - 7FH (0 - 127)
* This message is transmitted from SMF Player.
●Control Change
BnH kkH
n = MIDI channel number:
kk = Controller number:
vv = Control value:
* This message is transmitted from SMF Player.
●Program Change
Status 2nd byte
CnH ppH
n = MIDI channel number:
pp = Program number:
* This message is transmitted from SMF Player.
3rd byte
vvH
00H
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
01H - 7FH (1 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
vvH
0H - FH (ch.1 - 16)
00H - 77H (0 - 119)
00H - 7FH (0 - 127)
0H - FH (ch.1 - 16)
00H - 7FH (prog.1 - prog.128)
●Channel Pressure
Status 2nd byte
DnH vvH
n = MIDI channel number:
vv = Channel Pressure:
* This message is transmitted from SMF Player.
●Pitch Bend Change
Status 2nd byte
EnH llH
n = MIDI channel number:
mm, ll = Pitch Bend value:
* This message is transmitted from SMF Player.
■Channel Mode Messages
●All Sounds Off (Controller number 120)
Status 2nd byte
BnH 78H
n = MIDI channel number: 0H - FH (ch.1 - 16)
* This message is transmitted from SMF Player.
●Reset All Controllers (Controller number 121)
Status 2nd byte
BnH 79H
n = MIDI channel number: 0H - FH (ch.1 - 16)
* This message is transmitted from SMF Player.
●All Notes Off (Controller number 123)
Status 2nd byte
BnH 7BH
n = MIDI channel number: 0H - FH (ch.1 - 16)
* This message is transmitted from SMF Player.
●MONO (Controller number 126)
Status 2nd byte
BnH 7EH
n = MIDI channel number:
mm = mono number:
* This message is transmitted from SMF Player.
●POLY (Controller number 127)
Status 2nd byte
BnH 7FH
n = MIDI channel number: 0H - FH (ch.1 - 16)
* This message is transmitted from SMF Player.
Implémentation MIDI
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
mmH
0H - FH (ch.1 - 16)
00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191)
3rd byte
00H
3rd byte
00H
3rd byte
00H
3rd byte
mmH
0H - FH (ch.1 - 16)
00H - 10H (0 - 16)
3rd byte
00H
255