Transmitting; Receiving - Kenwood NX-5000 Serie Guide De L'utilisateur

TRANSMITTING

1 Select the desired zone and channel using the Selector knob
and the [Zone Up]/ [Zone Down] or [Channel Up]/ [Channel
Down] keys.
2 Press the PTT switch and speak into the microphone. Release
the PTT switch to receive.
The LED indicator lights red while transmitting and green while
●
receiving a signal. This indicator can also be disabled by your
dealer.
For best sound quality at the receiving station, hold the
●
microphone approximately 1.5 inches (3 cm to 4 cm) from your
mouth.

RECEIVING

Select the desired zone and channel. If signaling has been
programmed on the selected channel, you will hear a call only if
the received signal matches your transceiver settings.
25