Automatic Boost Function - ETNA A362KZT Mode D'emploi

operation

Automatic boost function

▷ The rear left, front right, and rear right cooking zones will switch
onto the highest power setting for 1.5 hours. The cooking zones
will then automatically switch off.
▷ To turn off the cooking zone, turn the knob back again
anticlockwise.
The automatic boost function is suitable for rapidly bringing food to the
boil and then continuing to cook it at a lower heat. The automatic boost
function will switch back to simmering mode automatically.
1. Place the pan in the middle of a cooking zone.
2. Turn the control knob to the left until the stop and wait for a beep.
An 'A' will appear in the display of the selected cooking zone. A '0'
will appear in the displays of the zones that are off. The cooking
zone is switched on.
3. Now turn the knob back to the right and choose a simmering mode.
The selected level will appear in the display. The automatic boost
function is now set and an 'A' and the set simmering mode will flash
in the display alternately.
▷ When the initial cooking time has elapsed, the flashing will stop and
the simmering mode will be shown permanently in the display.
▷ To turn off the cooking zone, turn the knob back again
anticlockwise.
The following table shows how long the initial heat-up time will take
before the system will automatically switch back to simmering mode.
Cooking Initial cooking time (heat-
level up time)
1 48 seconds
2 2 minutes and 24 seconds
3 3 minutes and 50 seconds
4 5 minutes and 12 seconds
5 6 minutes and 48 seconds
6 2 minutes
7 2 minutes and 48 seconds
8 3 minutes and 36 seconds
The automatic boost function cannot be used together with level 9 or
'boost'.
EN 11