Disc/Time Display; Checking The Dvd Function Status; Setting Preferences - Rotel RDV-995 Manuel D'utilisation

RDV-995 DVD Player

Disc/Time Display

While Playing a Disc
Press the DISPLAY-TIME button
an Audio CD or a Video CD, or twice for a
DVD Video disc. The disc/time display ap-
pears on the TV screen. (When playing a DVD
Video disc, you can also hold down the SHIFT
button while pressing the DISPLAY-TIME
7
button to display the disc/time.)
for DVD VIDEO
1 25 2:25:25
TITLE CHAP. TIME
Transmission rate
Time
Current chapter number
Current title number
for Audio CD or Video CD without PBC
1 00:08
TRACK TIME EACH
Time mode
Time
Current track number
for Video CD with PBC
1 25:25 PBC
TRACK TIME
PBC on status
Time
Current track number
To change the time display mode (only for
Audio CD or Video CD without PBC), press
DISPLAY-TIME while holding down
21
SHIFT . The time display mode cycles in
7
the following sequence.
For Audio CD:
(Elasped time of the current track)
(Remaining time of current track)
once for
21
(Total elasped time of the disc)
(Total remaining time of the disc)
For Video CD without PBC:
3.3
BITRATE Mbps
(Elasped time of the current track)
(Remaining time of current track)
The selected time information is displayed on
the TV screen, as well as the in the front panel
display window.
While stopped:
You can check the total disc time and current
(selected) track time of an Audio CD/Video
CD only from the front panel display window.
Press DISPLAY-TIME
SHIFT
7
indicated, the current (selected) track time
appears. When only REMAIN is indicated,
the total disc time appears. You can change
the current (selected) track by pressing
or
9
To turn off the disc/time display press DIS-
PLAY-TIME.
EACH
EACH REMAIN
TOTAL
TOTAL REMAIN
EACH
EACH REMAIN
while holding down
21
. When EACH and REMAIN are
.
22
20
Checking the DVD
Function Status
While a DVD Video is playing press the
DISPLAY–TIME button
status display appears on the TV screen.
1 / 2 1 / 2
ENGLISH
The current selections of the camera angle,
audio language and subtitle language are dis-
played.
To turn off the DVD function status display press
the DISPLAY-TIME button twice.

Setting Preferences

The Preference selection function allows you
to set a number of preferences for playback
via four dedicated displays.
Using the Preferences Display
While a DVD disc is loaded but not playing,
or while no disc is loaded, press the RETURN-
CHOICE button while holding down the
20
SHIFT button. One of the Preference pages
7
appears on the screen.
There are four Preference pages: Language,
Audio, Display and System. To select a dif-
ferent page, use the Cursor Buttons
to move to the tab for that page.
.The DVD function
21
1 / 2
ENGLISH
/
12