Hdmi Connection - Yamaha DRX-730 Mode D'emploi

HDMI connection

If your TV has an HDMI input, you can connect it to
the DRX-730 with an HDMI cable and enjoy the best
possible picture quality.
Using an HDMI cable (sold separately), connect
the DRX-730's HDMI jack to an HDMI input on
your TV.
HDMI
HDMI cable
(sold separately)
MAINS HDMI
CLASS 2 WIRING
CABLAGE CLASSE 2
R
6 MIN SPEAKER
SUBWOOFER OUT IN
SPEAKERS OUT AUX
Note:
• You must set the DRX-730's HDMI resolution
and HDMI color settings to match the capabilities
of your HDMI TV (see page 53). If you select the
wrong resolution, you may loose the picture
altogether.
■
Supported HDMI output resolutions
North America models
1080p/60 Hz
1080i/60 Hz
720p/60 Hz
480p/60 Hz
480i/60 Hz
* If your HDMI-compatible TV does not support the above
resolutions, the picture may not display correctly.
* The DRX-730 is designed to be connected to an HDMI
component. If it's connected to a DVI component, normal
operation may not be possible depending on the DVI
component.
HDMI-compatible TV
IN
AM
ANT
GND
FM
ANT
75
UNBAL.
P P
R B
Y
R OUT
VIDEO COMPONENT
OPTICAL
DOCK VIDEO OUT DIGITAL
Other models
1080p/60 Hz (NTSC)
1080p/50 Hz (PAL)
1080i/60 Hz (NTSC)
1080i/50 Hz (PAL)
720p/60 Hz (NTSC)
720p/50 Hz (PAL)
480p/60 Hz (NTSC)
576p/50 Hz (PAL)
480i/60 Hz (NTSC)
576i/50 Hz (PAL)
■
HDMI audio output
Normally, the speakers connected to the DRX-730 are
used to output the sound. However, you may want to
listen through your HDMI TV's speakers, in which
case you can turn HDMI audio output on and off as
follows.
1
Set the DRX-730 to standby.
2
While holding down Stop ( ) on the
DRX-730, press STANDBY/ON, keeping
Stop ( ) pressed until "DVD — NO REQ."
appears on the display.
3
Press Play/Pause (
"HDMI AUDIO ON."
If you change your mind at this point, select
"DVD — NO REQ. " instead.
4
Press STANDBY/ON.
HDMI Audio output is turned on and the
DRX-730 goes on standby. Press STANDBY/ON
again to turn it back on.
To turn HDMI Audio output off, repeat the above
procedure but select "HDMI AUDIO OFF" in
step 3.
Note:
• The audio output by the HDMI jack is always
2-channel PCM.
■
About HDMI
HDMI stands for High-Definition Multimedia
Interface. An extension of the DVI (Digital Video
Interface) standard used to connect computer
displays, HDMI was designed as the next generation
digital interface standard for TVs and AV equipment,
allowing uncompressed digital video and digital
audio in various formats to be delivered on a single
cable. With HDMI, separate cables for video and
audio connections are no longer necessary. And
because it's digital, it delivers unimpaired high quality
video and audio. In addition, HDMI supports the
HDCP (High Bandwidth Digital Content Protection)
system that's used to protect copyrighted video and
audio content from illegal copying.
Chapter 2: Getting Started
/ ) repeatedly to select
13
En
2