Troubleshooting & Support; Vacuum Pump - Tribest dynapro DPS-2200 Manuel De Fonctionnement

9. TROUBLESHOOTING & SUPPORT
This built-in feature is designed to protect the motor and prevent your machine from
Automatic
overheating. When engaged, Automatic Overload Protection will cause the motor to shut
Overload
off and possibly emit a light odor.
If Automatic Overload Protection should ever be activated, let your machine rest for at
Protection
least 10 minutes before resuming operation.
In the event that the MOTOR CLUTCH at the bottom of your container loosens or your
blades do not seem tight, DO NOT CONTINUE TO USE THE CONTAINER. Use the screw
Loosening of
at the bottom of the container to release the blade assembly and check the seals. Your
seals may need to be replaced. Replace and then reinsert the blade assembly and
Blades
tighten securely before resuming use. If your seal is not the issue, please contact Tribest
Customer Support for additional support.
When the LCD DISPLAY reads "ERR1," this indicates that there's an issue with the motor
or motor sensor. If the motor sensor does not detect any motor rotation or if the rotation
speed is abnormally low, the machine will stop running, display "ERR1," and make a
Error Code
beeping alarm sound. Please contact Tribest Customer Support to resolve this issue.
[ ERR1 ]
The following parts may need to be checked:
1. Motor Assembly Connection and/or Motor Assembly
2. Power PCB Assembly
When the LCD DISPLAY reads "ERR2," this indicates that the blending container is
not properly installed on top of the motor base. If the blending container is removed
mid-operation, the machine will stop running, display "ERR2," and make a beeping
Error Code
alarm sound. Please check to see that the blending container is properly seated before
[ ERR2 ] operation and removed ONLY after the blender is no longer in operation.
The following parts may need to be checked:
1. Proper reinstallation of blending container
2. Safety Switch Assembly

Vacuum Pump

See troubleshooting tips on page 10. .
Issues
In the event that you have any questions concerning the use, care, or service for this product, please
feel free to call us or send us an email. If you purchased your product outside of the United States,
please refer to your warranty card for your nearest service center.
United States
Tribest Corporation
1143 N. Patt St.
Anaheim, CA 92801
Toll-Free: 1-888-254-7336
service@tribest.com
CUSTOMER SUPPORT
International
Tribest Corporation
1143 N. Patt St.
Anaheim, CA 92801
Telephone: 1-714-879-7150
service@tribest.com
EN
13