Power Button Function; Brightness Button; Video/Single Frame Button - CooperSurgical Endosee Manuel De L'utilisateur

Endosee Hysteroscope - User Manual
®

6.4 Power Button Function

The function of the Handheld Monitor Power Button
on the Hysteroscope is described below.
WARNING:
and condition before powering-on the fully
assembled unit. Do not use the system if vi-
sual signs of external damage are observed.
Figure 7: Power Button
Touch Function
Power On
Power Off

6.5 Brightness Button

The LED Brightness control is a cycle-through push
button. There are four (4) steps of LED brightness
adjustments.
Figure 8: Brightness Button

6.6 Video/Single Frame Button

The Video/Single Frame Button allows user to save
still images and video images. The image capture
operations are described below.
Figure 9: Video/Single Frame Button
Video/Single frame Touch Function Action
Capture Still Image
Capture Video Clip
Stop Video Capture
Inspect the integrity of the unit
Action
Press-and-Release
Press-Hold (1s) and Release
Press-and-Release
Press-and-Hold: See Page 22
While system is capturing
video, press button one
more time
20