MSA SavOxCap 60 Mode D'emploi page 10

USE
10
Fitting the neck strap
(4) Place the neck strap around the neck, straighten
and tighten until the apparatus is located across
the chest.
(5) Pull the container downwards and remove using
both hands, so that the hood can unfold.
Attention!
The apparatus must only be pulled out of the
container using the neck strap. Otherwise, the
apparatus could be damaged and thus would
no longer provide secure protection.
Attention!
Activate the apparatus before putting on
the hood.
Activating the apparatus
(6) Now pull the start ring under the apparatus
forwards.
The starter automatically fills the bag with
breathing air.
Putting on the hood
(7) Hold the hood in both hands and spread the neck
seal.
(8) Place the hood over the head.
(9) Place the inner mask on the chin and nose and
press securely in position.
SavOxCap 60
MSA
GB