Using Your Vacuum In Upright Mode; What Does The Brushroll Indicator Light Mean - shark APEX duo clean Powered Lift-Away AX952 Serie Instructions

USING YOUR VACUUM
IN UPRIGHT MODE
WARNING: DO NOT
use to vacuum up drywall
dust, fireplace ash, or
embers. DO NOT use as
an attachment to power
tools for dust collection.
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushrolls are spinning
and working as they should.
Solid Red
There is a jam in the brushroll
area. Turn off your vacuum
and remove any blockages.
Flashing Red*
The motorized floor nozzle
is overheating. Turn off your
vacuum and wait for it to
cool down. After vacuum has
cooled, move Surface Selector
switch to Thick Carpet mode,
then press Power button to
turn vacuum back on.
1
Plug power cord into outlet. Place foot on floor nozzle
No Light
and tilt handle back.
The brushrolls are not spinning
because the vacuum is off.
* See Troubleshooting section for
further instructions.
9
1-800-798-7398
STEP 1 STEP 2
2 Press power button to turn on vacuum.
Please note the brushrolls will not spin
unless the wand is reclined.
STEP 3
3 Choose the appropriate setting.
Thick Carpet & Area Rug Cleaning
Set floor selector to Thick Carpet/Area
Rug.
Carpet & Low Pile Cleaning
Set floor selector to Carpet/Low Pile to
increase the speed of your brushrolls and
to help remove stuck-on dust and debris.
Hard Floor Cleaning
Set floor selector to Hard Floor.
NOTE: For deep cleaning per ASTM F 608 (embedded
dirt in carpets) please set to Carpet/Low Pile.
s h a r kc l e a n . c o m
10