Yamaha MZ175 Manuel Du Propriétaire page 46

4
1
3
5. Install the spark arrester.
TIP
Align the spark arrester lump with the hole in the muf-
fler pipe.
3 Spark arrester lump
3
4 Hole
6. Install the screw, and then tighten the screw.
(For MZ175, MZ200, MZ360)
2
1. Loosen the muffler cap bolt and then remove the
1 Muffler cap bolt
2 Muffler cap
3 Muffler screen
2. Use a flathead screw driver to pry out and remove
4
4 Spark arrester
3. Remove the carbon deposits on the muffler cap,
NOTICE
When cleaning, use the wire brush lightly to avoid
damaging or scratching of the muffler screen and
spark arrester.
muffler cap and muffler screen.
the spark arrester from the muffler.
muffler screen and spark arrester using a wire
brush.
– 41 –