Yamaha MZ175 Manuel Du Propriétaire page 47

6
8
9
7
0
4. Check the muffler screen and spark arrester.
Replace them if damaged.
5. Install the spark arrester.
TIP
5
Align the spark arrester lump with the hole in the muf-
fler pipe.
5 Spark arrester lump
6 Hole
6. Install the muffler screen to the muffler cap, then
7
install the muffler cap to the muffler.
7 Muffler cap
8 Muffler screen
TIP
Install the muffler cap until it contacts with the projec-
tion on the muffler.
9 Projection
7. Install the muffler band, then tighten the muffler
cap bolt.
0 Muffler band
Muffler cap bolt tightening torque:
3.5 Nm (0.35 m·kgf, 2.5 ft·lbf)
– 42 –