Fitting Instructions - gdw 1016 Instructions De Montage

Ford Maverick + Nissan Terrano
1993 – 2003
Ref. 1016

Fitting instructions

1) Place the tow bar, so that the points (A) fit the holes in and between the towing rings. Insert all bolts, washers and
nuts, and tighten firmly.
2) Install the (*) and tighten also firmly.
Composition
1 tow bar 1016
1 flange ball 50T90
2 bolts M16x50
2 safety washers M16
2 nuts M16
1 security shackle 50T
6 bolts M12x35
6 safety washers M12
6 nuts M12
6 washers 40x35x12x4mm
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
(*)
(*)
(*)
(*)
(A)
(A)
(A)
(A)
All bolts and nuts : quality 8.8