Power Supply Connections - Eneo MPD-62M2812P0A Guide D'installation Rapide

Extended viewing angle
Tilted Easy Adaptor (Option)
CAUTION:
Extreme care should be taken NOT to scratch the bubble dome
surface while the camera installing or adjusting.
Care should be taken the cable is NOT to be damaged, kinked or
exposed in the hazardous area.
Tighten enough the dome cover xing screws so that there
should be NO gap between Lens hood and clear bubble to avoid
the light in ow from IR LEDs.

Power supply connections

Camera can be operated with the regulated or unregulated 12VDC but the regulated
power supply of 12VDC is recommended. Camera is protected from damage by the
reverse connection of polarity.
i
Please use the cable as provided with camera. If camera cable is cut and re-wired,
the transmission distance of video can be reduced. Especially SDI cable should not be
cut because it requires detailed wiring job and a ects the transmission distance.
SDI OUTPUT (Yellow)
ANALOG OUTPUT
(Black)
POWER
EN
9