Power Supply Connections - Eneo IPD-62M2812P0A Guide D'installation Rapide

Power supply connections

Make sure the power is removed before the installation. Camera can work with either
12VDC or PoE (IEEE Std. 802.3af ). Primary and secondary grounds are completely isolated
to avoid the possible ground loop problems.
1. Plug the network cable into RJ-45 Ethernet Port. If PoE is the unique power, there
will be no need to connect Power terminal.
2.
then plug the DC adapter to DC outlets to avoid an improper reset from power
jitter and a damage from the surge voltage when no load.
i When PoE and local power are connected at the same time, local power has priority.
10