User's Manual
Fig. 10: Aligning and marking
Fig. 11: Drilling drill holes
Fig. 12: Wall mounting
4.3
Warning level
Tab. 18:
22
2.
3.
Use the wall plate (A) as template.
Safety instruction
Risk of injury by tripping and falling
>>
and acceories in a safe way.
Risk of material damage by improper
procedure
>>
Only use moderate force when tightening
the screws in order to avoid damaging
threads.
>>
installation!
>>
long screws.
cables or other lines lying
damage them.
Use a spirit level to mark the
drill holes on the wall.
Mark the drill holes 1 to 6 with
a pencil.
10mm concrete drill 60mm
deep.
in each drilling hole.
the arrow is pointing up.
Bid / Ban