Telephone Mute Function (Tel); Display Setting (Lcd); Display Colour Setting (Col); Display Brightness (Lum) - JVC KD-NX10 Manuel D'instructions

PSM (Preferred Setting Mode) menu

Telephone mute function (Tel)

If a telephone with hands-free operation
is installed, the call may be routed
through the speaker system. This elimi-
nates the need for an additional speaker.
However, the signal leads (AF – Tele-
phone input and Earth – Telephone in-
put) must be connected to the car radio.
To set, call up PSM menu.
By pressing multifunction button
, select Audio Sig.
• Mute - Telephone Mute setting
• - Telephone conversa-
Audio Sig.
tion via car radio

Display setting (Lcd)

The display setting allows you to select
among three different display versions.
• Positive display (
p o s i t i v
• Negative display (
n e g a t i v
• Automatic display (
a u t o m a t i c
the display will appear negative or
positive depending on vehicle illumi-
nation.
174
For selection, request PSM menu. By
pressing the multifunction button
select either
p o s i t i v or
The setting is stored automatically.
or Mute .

Display colour setting (Col)

This setting is used to choose between
two illumination colours.
For selection, request PSM menu. By
pressing the multifunction button
select either red
The setting is stored automatically.
)
)
) -

Display brightness (Lum)

With this function, the brightness of the
n e g a t i v ,
display can be set.
a u t o m a t i c .
To set, call up PSM menu.
Press the
With the right rotary control
either
The setting is stored automatically.

LED setting

This function can be used to switch the
or yellow . LED function (flashes when the unit is
switched off) on and off.
To set, call up PSM menu.
By pressing multifunction button
On) or
The setting is stored automatically.
multifunction button.
, select
(light) or (dark).
8 1
select either blinking (LED
off (LED Off).