Displaying Traffic Information - JVC KD-NX10 Manuel D'instructions

Displaying traffic information

Current traffic announcements can be
displayed in text form. There are several
options for requesting current traffic in-
formation.
Traffic information can be requested via
the multifunction buttons
in the route guidance display and,
in the case of inactive route guidance,
via the multifunction button
information menu.
Route guidance display:
By pressing the multifunction button
, a list of all currently available
traffic information will be displayed.
or
By pressing the multifunction button
, a list of all current traffic infor-
mation relevant for the calculated
route is displayed.
Note:
If no other traffic information is availa-
ble,
NO TRAFFIC MESSAGES RE-
is displayed.
CEIVED
Information menu:
and
For inactive route guidance, the infor-
mation menu can be requested by press-
ing the left rotary control
in the
Press the multifunction button.
A list of currently available traffic infor-
mation is displayed.
In the list of current traffic information,
more detailed information on the indi-
vidual announcements can be requested.
Navigation operation
The scroll marks at the right edge of the
display indicate that additional traffic in-
formation is available.
A selection can be made by turning the
right rotary control
. confirm.
After confirming the traffic information
desired, the information is shown in its
entirety. A typical traffic announcement
is shown as follows.
• a motorway or road number
• approximate direction information
• detailed location and direction infor-
mation
• the event
• the cause, if known
and pressing to
135