Service Mode - JVC KD-NX10 Manuel D'instructions

• Calibration has been completed successfully if the main navigation
menu is displayed.
• For correct navigation on routes with time-dependent traffic guid-
ance, the time should be set correctly as described under "System
settings" in the Instructions.

Service Mode

In Service Mode, various functions can be checked in detail and the cal-
ibration can be modified.
• Switch on the unit (see Instructions).
Enter code (see Instructions).
• If the unit has already been calibrated, select the main navigation
menu by pressing the
If the unit has not been calibrated, proceed as described in the next
point but one.
• By pressing the key
tings.
• Press and hold the multifunction buttons
hold the multifunction button
Mode.
key.
once again, you access the System Set-
. Now press and
. This calls up the Service
Installation/Connection Manual
201