JVC KD-NX10 Manuel D'instructions page 209

• Engage the reverse gear for the reverse signal function test.
The number value after
• Drive round a bend to test the function of the internal sensors.
The values after
X:
In order to quit the sensor test, press the
back to the Service Mode.
Test language ( SPEECH TEST
A test program is used to test the voice.
• In the Service Mode, select
control and press to confirm.
The announcement "Please insert Navigation CD" is given.
By pressing the right rotary control
repeated.
Press the button after completing the test. The unit switches
back to the Service Mode.
must jump from
REV. 0
and must change.
Y:
button. The unit switches
)
with the right rotary
SPEECH TEST
, the announcement can be
Installation/Connection Manual
to ( to ).
1 1 0
207