Radio Operation; Switching On Radio Mode; Switching On Radio Menu Mode; Selecting The Fm Waveband - JVC KD-NX10 Manuel D'instructions

Radio mode

Switching on radio mode

Press .
The last selected waveband is called up.
Switching on Radio Menu
Mode
Press in radio mode.
The radio menu mode is activated and
displayed. The unit switches back to ra-
dio mode if no button is pressed within
the next 8 seconds.

Selecting the FM waveband

Requesting radio menu mode.
Press the multifunction button.
The last selected station and level are
displayed.
By pressing repeatedly, you can choose
between the levels Seek
Seek Name , Stations
Stations RDS .
• Seek Quality (see also page 178)
• Seek Name (see also page 178)
• Stations FIX (see also page 178)
• Stations RDS (see also page 178)

Selecting the AM waveband

Requesting radio menu mode.
Press the multifunction button.
The last selected waveband and station
are set.
To select the
LW ( Long
Wave ) wavebands, repeatedly press
multifunction button
Quality , desired waveband is set.
FIX and

Settings for station selection

The desired station can be selected via
dynamic autostore (FM), autostore
(MW, LW), station search, scan search,
manual tuning, and station buttons.

Radio operation

MW ( Medium Wave ),
Wave ) and SW ( Short
until the
149