Connection Of The Components - Megasat Caravanman Kompakt 3 Mode D'emploi

2. Installation

2.4 Connection of the components

Ignition plus
The antenna automatically moves to the retracted position as soon as the ig-
nition key is turned. This function is only guaranteed if the control unit is swit-
ched on and cables 4 and 5 are connected to the ignition plus of the vehicle.
Power supply
DC 12 V via battery (positive pole permanent supply RED) or optional 230 V / 12 V
DC power supply (no chargers). Make sure that a current of at least 5 amperes
is guaranteed.
1 Coax cable 10 m
2 Coax cable 1 m
3 Positive pole
4 Negative pole
5 Ignition plus
Warning: Always connect the control unit via a 7 ampere fused cable
of at least 2.5 mm² thickness. Never connect to the car battery without
a fuse.
08 ENGLISH