Connecting The Components; Control Unit; Front View; Rear View - Megasat Caravanman Kompakt Mode D'emploi

2. Installation

2.4 Connecting the components

Plus ignition
The Caravanman compact automatically moves to the retracted position when the igni-
tion key is turned. This function is only available when the controller is switched on and
4 5
cables and connected. Once the antenna is retracted, the LEDs light up on the
control unit of the satellites in succession.
F-connector WITHOUT
marking
(+) (-)
1
4
5
4
3

Control unit

(-) (+)
Power supply:
12V DC via battery (positive-perma-
nent systems) or optional DC power
supply 230V/12V (no charger). Ensu-
re that a current is assured of at least
5 amps.
1
Coax cable 10 m
2
Coax cable 1 m
3
Positive pole
4
Negative pole
5
Plus ignition
08
F-connector WITH
marking
Second connection
only Caravanman
compact Twin
2
not in
Included!
TV TV
Warning:
Connect the device only at a 7 amp
protected line. The line must be at least
2.5 mm² strong. (never directly to the car
battery).
ENGLISH
3. Control unit

3.1 Front view

Main power
USB connection for
Firmware Update

3.2 Rear view

Connection
for antenna
Connection
for TV (set-top box)
Warning:
Connect the device only at a 7 amp protected line.
The line must be at least 2.5 mm² strong. (never directly to the car battery).
Satellite selection
Display (up / down) Confirm
LED displays Home position
(PWR = Power) (no function)
(SEARCH = Searc)
(STOW = no function)
(ERR = Error)
Port for Power supply
Service 12 V / 24 V
ENGLISH
09