Installation; Installation On The Roof; Preparation - Megasat Caravanman Kompakt 3 Mode D'emploi

2. Installation

2.1 Installation on the roof

As a matter of principle, we recommend having the installation carried
out by your specialist dealer or a specialist workshop! Please also note
that the vehicle height changes accordingly due to the antenna! Please
strictly adhere to the individual points of the installation instructions!
General information
Provide a suitable workplace, a garage/hall is better than an outdoor place. The
ambient temperature for installation must be between +5° C and max. +25° C.
Do not work directly in the sun. Observe the work regulations when handling
chemical products. Ensure the necessary work hygiene.

Preparation

1. Make sure that the roof of your vehicle is sufficiently stable. If the roof sta-
bility is insufficient or doubtful, attach an approx. 2 mm thick sheet metal
plate measuring approx. 100 x 100 cm to the outer skin of the roof. Please
ask your vehicle manufacturer for more information.
2. Check that all parts are present.
3. Place the antenna on the later mounting
place and align it so that the mirror and
the LNB unit point towards the rear of
the vehicle. Ensure that the mounting
surface is level and that no roof struc-
tures are in the way. Always observe
the mounting dimensions in this user
manual. The minimum distance to an air
conditioning unit should be 30 cm.
4. Clean the mounting surface with a
suitable cleaner and a fleece cloth to
remove dirt and impurities. Then mark
the antenna base with a pen.
ENGLISH 05