Battery Replacement - RS Pro ICM 136R Manuel D'instructions

Min / Max Hold
 MAX: The clamp-multimeter stores the
maximum and minimum values. The
maximum value is displayed.
 MIN: The clamp-multimeter stores the
maximum and minimum value. The
minimum value is displayed.
 MAX MIN (flashing) :
The clamp-multimeter stores the
maximum and minimum values.
The present value is displayed.
 Normal: Press and hold the MIN MAX
button to return to normal operation.

Battery Replacement


Warning : Disconnect the clamp-
multimeter from all power sources and
remove it from around a conductor before
removing the battery compartment cover.
Replace battery:
Replace the battery when the low battery
symbol " " appears on the display.
8