General Instructions - Grammer LINEA Manuel D'utilisation

General inst ru c t io ns
•
The operating instructions must be read in full before use.
•
The operating instructions must be kept in the vehicle and always be at hand.
•
The driver's seat must be fitted, serviced and repaired by specialist personnel only.
The respective national regulations and the vehicle manufacturer's fitting instructions must
be observed.
The respective national fitting regulations can be obtained from
agencies of the company, or from the vehicle manufacturer.
•
A correctly functioning and individually adjusted driver's seat is essential to your health. Take
adequate care of your seat and have it serviced regularly to ensure that it functions correctly.
The functional checks are to be carried out at least as regularly as vehicle services
(see maintenance plan for vehicle).
•
These operating instructions should always be kept with the driver' s seat. If the seat is
passed on to a third party, it must be accompanied by the relevant operating instructions.
•
Subject to modifications serving technical progress and to deviations compared to the
standard type seat arising from them.
S af et y inst ru c t io ns
•
To prevent injury,
seat.
•
removed from the seat cushion and the backrest upholstery.
•
To eliminate any risk of accident, the settings must be checked to ensure they are correctly
engaged
•
Adjustments must
•
ported, for example held in place, before the backrest adjuster is operated. If you fail to do
so, there is a danger that the backrest frame may jerk forward and
•
original parts provided by
been tested.
•
During the removal and installation of the driver's seat, the corresponding instructions by the
specific vehicle manufacturer must be strictly observed!
•
Do not hold onto the covers for lifting the driver's seats. If you do so anyway, there is an
18
of the driver' s seat, possible
.
be made
of the driver' s seat (e.g. fitting parts which are not
AG) might impair the safety standard to which it has
, threatening your
must be approved by
.
, the backrest frame must be sup-
AG.
.
AG or from
of the driver's
has to be
.
. For this reason,
GB