Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.1.3 Adapter plate for 0.2 ml tubes or 96-well
PCR plates
1.
Remove the lock washers (4) from the short screws in the exchange-
able thermoblock.
2.
Remove the short screws.
3.
Connect the adapter plate (2) to the MTP thermoblock (3) using the
long screws (1).
4.
Secure the screws from below using the lock washers.
The lock washers prevent the screws from falling out of the bores if
the exchangeable thermoblock is not fixed on the unit.
5.
Place the adapter plate on the device with the MTP thermoblock.
6.
Tighten the screws.
6 · Thermoblocks for Mixer HC · User Manual
1
2
3
4
Publicité
Table des Matières
