Funkwerk elmeg CS410 Notice D'utilisation page 22

English
s
»
Volume
s
»
transfer
s
»
MSN name
s
»
Charge
s
» «
PIN
Reset - Resetting to default state
You can reset the telephone to its initial state using the procedure described as follows. All of the data that
you have entered previously will be deleted.
If you have connected the elmeg T400, T400/2 key extension module to your phone all of the data for the
module will also be deleted when this procedure is executed.
Please note: Settings for the answering machine and any texts that have been stored will not be deleted.
Please refer also to the instruction manual supplied with your answering machine.
Begin as follows:
M s
a
Configu-
s
Press » « to reset the telephone to its initial
ok
state. If you do not wish to have the data dele-
ted press »
No
When you press the »
phone is reset to the default state. All data are
deleted.
18
« Setting the volume
« Programming a default call forwarding number
« Assign a name to the MSN extension number
« Programming a charge limitation for a specific extension number
(MSN)
Assign a specific PIN for an externsion number (MSN)
s
Service
ration
«.
« softkey, the tele-
ok
O
t
Telephone
PIN
Sure to delete all?
No
^
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Which language
Italiano
Deutsch
Française
s s
Data ok
ok
}
Español
English
Nederlands