Funkwerk elmeg CS410 Notice D'utilisation page 11

Connecting to and operating the system telephone at the pabx system (basic function including
DHCP)
Consult the installation instructions for the PABX system to determine which port can be used for connec-
ting the IP-S400. Connect this port with the Ethernet PABX port on the system telephone.
• Configure your PABX system for use with IP system telephones.
• Define the MSNs for the IP system telephones within the PABX system.
• Switch on the power (plug-in power supply unit) to the IP system telephone and wait until the tele-
phone has been initialized.
Once the IP system telephone has been initialized you will be requested to select the language in the display.
• Select the display language.
Press the buttons to view the available langua-
ges.
• Enter one of the MSNs that has been input to the PABX system (in the example shown here, 12) .
Confirm your entry by pressing
If no PIN has been entered in the system con-
figuration, press button
O
again after being requested to do so.
• Swtich to Use DHCP.
Select » « .
on
• The telephone and PABX system are synchronized.
If there is no connection to the PABX system (no LAN link, or the telephone has not been logged
in), the symbol l »
You can now use the IP system telephone at the ISDN or UP0 port.
Changing the label
The labels for the function keys are provided on the last page of this operating manual. Cut out the label you
wish to use.
To change the label panel, press the flexible cover together between your index finger and thumb and lift it
out. The label panel can now be changed.
You can fill in the label panel via your PC yourself. The CD ROM supplied with the system contains an Ado-
be Acrobat file with templates.
O
O
and button
« will be shown in the display instead of the time.
-----/ /----‰
Which Country?
Italiano
Deutsch
Française
.
Programm dial number
MSN-1>12
IPS login PIN for sys
MSN-1>
Use automatic IP
adress setting
off
English
}
Español
®English
Nederland
server
on®
7