Yamaha YZ450F 2008 Manuel D'atelier Du Proprietaire page 155

STEERING
REMOVING THE STEERING
Order
Hold the machine by placing the suitable stand
under the engine.
Number plate
Handlebar
Front fender
1 Steering stem nut
2 Front fork
3 Upper bracket
4 Steering ring nut
5 Lower bracket
6 Bearing race cover
7 Upper bearing
8 Lower bearing
Part name
5-28
Q'ty
TIGHTENING STEPS:
• Tighten ring nut. 38 Nm (3.8 m•kg, 27 ft•lb)
• Loosen it one turn.
• Retighten it. 7 Nm (0.7 m•kg, 5.1 ft•lb)
Refer to "HANDLING NOTE".
Refer to "SEAT, FUEL TANK AND SIDE
COVERS" section in the CHAPTER 4.
Refer to "HANDLEBAR" section.
1
2 Refer to "FRONT FORK" section.
1
1 Refer to removal section.
1
1
1
1 Refer to removal section.
STEERING
Remarks