Assembly Instruction - SPORTSTECH BRT200 Mode D'emploi

i
Tools Required to Assemble the Machine: Two Adjustable
Wrenches and Allen Wrenches NOTE: It is strongly re-
commended this machine be assembled by two people to
avoid possible injury.
Step 1
A
Attach Rear Base Tube (#3) to the Seat Pad Support (#6). Secure it with two M10 x
70mm Allen Bolts (#21), Ø 10mm Washers (#18), and M10 Nuts (#20).
B
Insert Inner Adjustable Tube (#7) into the Front Base Tube (#2). Secure it at desired
height, by inserting a Lock Knob (#10) through Front Base Tube (#2) and into the
holes in the Inner Adjustable Tube (#7).
C
Attach Inner Adjustable Tube (#7) to the Seat Pad Support (#6). Secure it with one
M10x65mm Allen Bolt (#22), Ø 10mm Washer (#18) and M10 Nut (#20). Insert
Lock Knob (#10) through the Seat Pad Support (#6) and onto the outside edge of
Inner Adjustable Tube (#7) to lock it into position. To fold up unit pull Lock Knob out
and fold Front Base Tube towards the Seat Support Pad and push lock knob into hole
in Inner Adjustable Tube.

3. ASSEMBLY INSTRUCTION

25